Item No.: HM-310

  Products Specifications: -

  • Flanged Ends to DIN-2533, PN-16, R/F up to 6" & DIN-2532, PN-10 for 8".

  • Straight Pattern.

  • Renewable S.S. (AISI 410) Trim.

  • Bolted Bonnet O/S & Yoke Type.

  • Handwheel Operated.

  Salient Features: -

  • Backseat provision for under pressure re-packing.

  • Full flow design.

  • Non asbestos gland packing / gasket.

  • Minimum pressure drop.

  Testings: -

  • Hydraulic test pressure 26 Bar (370 Psig).

  • Maximum saturated steam working pressure 13 Bar (185 Psig).

  • Maximum working temperature - 220 C (428 F).

  Certifications: -

  • IBR Test Certificate in Form-IIIC, issued by The Director Of Boilers, Punjab is furnished with each valve.

   Applications: -

Steam Water Oil Air Gas

   
 

 

Nominal Size 15 20 25 32 40 50 65 80 100 125 150 200
L 1301 1501 1601 1801 2001 2302 2902 3102 3502 4002 4802 6002
H 165 170 180 200 225 235 280 310 350 380 410 520
W 100 100 100 125 160 160 200 200 250 250 315 400
D 95 105 115 140 150 165 185 200 220 250 285 340
T 14 16 16 18 18 20 20 22 24 26 26 26
R 45 58 68 78 88 102 122 138 158 188 212 268
f 2 2 2 2 3 3 3 3 3 3 3 3
P. No.   Description Material Remarks
1   Nut M.S. -
2   Washer M.S. -
3   Handwheel C.I. IBR 86 to 93 Gr.A
4   Stem S.S. AISI 410
5   Bush S.S. AISI 410
6   Gland S.S. IBR 86 to 93 Gr.A
7   Packing Graphited Asbestos / Non Asbestos
8   Bonnet C.I. IBR 86 to 93 Gr.A
9   Gasket C.A.F. IS 2712
10   Disc Nut S.S. AISI 410
11   Screw Steel -
12   Disc S.S. AISI 410
13   Body Seat Ring S.S. AISI 410
14   Body C.I. IBR 86 to 93 Gr.A
15   Studs & Nuts M.S. -